Coffee shop furniture, made to order
Cafe chairs, two-tops and lounge corners sized for small floors and daily wipe-downs. Built in our own Foshan workshops, shipped direct with drawings before production.
Crema Seat (a line by EASEN Commercial Furniture) designs and builds commercial cafe chairs, cafe tables and lounge seating for coffee shops, bakery-cafes and specialty coffee chains. Everything is made to order in our own production base in Foshan, China, approved on shop drawings first, and shipped factory-direct by sea on FOB, CIF or DDP terms.
Cafe chairs are compact armless side chairs, typically 17-20 in (43-51 cm) wide with an 18 in (46 cm) seat height, designed to tuck under a 29-30 in (74-76 cm) table and survive constant moving and wiping.
8 →
Upholstered cafe dining chairs add a fully padded back or wraparound shell, trading a few inches of width for comfort that keeps guests ordering a second cup.
4 →
Lounge chairs are low, deep seats (about 15-17 in / 38-43 cm high) paired with side tables, used to create a slower corner that lifts dwell time and average ticket without taking over the floor.
6 →
Cafe tables are small dining tables, usually 24-30 in (61-76 cm) square or round for two and 30-36 in (76-91 cm) for four, at a 29-30 in (74-76 cm) height, on a pedestal base sized to stay steady when guests lean on it.
7 →
A 40-seat cafe lives or dies on inches. Our cafe chairs run 17-20 in wide (43-51 cm) and our two-tops start at 24 in (61 cm) square, so you can hold a 36 in (91 cm) accessible route and still add a table. We draw your floor plan with the furniture before you commit.
Cafe furniture gets cleaned more than it gets sat on. We specify sealed edges on tops, catalyzed or PU lacquer on wood, powder coat on steel, and bleach-cleanable vinyl or tightly woven contract fabrics on seats, so a quick wipe between guests does not shorten its life.
Molded veneer, solid ash and walnut tones, steel and cane: the materials that make a coffee shop feel like a neighborhood room. Frames are glued and mechanically fixed, seats are replaceable, and every finish is sampled before the run so your brand palette is matched, not guessed.
A slim cafe side chair with a curved molded-veneer back on a dark steel spine, a padded seat and solid-wood legs.
A lightweight side chair with an upholstered curved back, a natural-wood seat and thin black steel legs.
A walnut-tone curved back over a green upholstered seat, on splayed solid-wood legs: the classic neighborhood cafe chair.
The Barista's lighter sibling: the same curved walnut-tone back and round padded seat on slim powder-coated steel legs.
A wide, low, curved walnut-tone back floating above a soft grey seat on angled solid-wood legs.
A compact steel-frame side chair with a curved walnut-tone back and an upholstered seat, designed for tight two-top runs.
A tall, rounded wooden shell back with a padded seat cushion on solid-wood legs, our signature cafe chair.
A bentwood-style back on a thick, round upholstered drum seat: a playful chair built to carry your brand color.
Send a sketch or CAD plan, seat count target and service style (counter order, table service, laptop-friendly). We reply with a furniture schedule and a first seat plan.
Choose from the range or adapt a design: seat height, width, table size, fabric or vinyl, stain and metal color. We confirm foam and fabric specifications for your market's fire rules.
Every item gets a dimensioned drawing for your sign-off. A pre-production sample chair or table can be built and shipped to you before the full run on request.
Production in our Foshan workshops, typically 30-60 days depending on custom work. We check dimensions, joints and finishes against the drawings and send photos before packing.
Export cartons, palletized or loose-loaded, shipped FOB, CIF or DDP. Chairs arrive assembled or flat-packed per your choice, with simple instructions for your local installer.
Which cafe chair suits your coffee shop? We compare bentwood, molded veneer, metal, upholstered and lounge chairs on size, comfort, cleaning and durability.
Which cafe furniture materials last under sanitizer and daily wiping? Vinyl vs fabric, veneer vs laminate vs stone, wood finishes, steel coatings, foam and glides.
Standard cafe table sizes for two and four, table and counter heights, window bar depth (12-18 in), stool spacing, base sizing and ADA rules for coffee shops.
Crema Seat is a line by EASEN Commercial Furniture focused on coffee shop and cafe furniture: side chairs, upholstered dining chairs, lounge chairs and small tables. We make everything to order in our own production base in Lecong, Foshan, China, the largest furniture trading hub in the world, and ship factory-direct to coffee shop owners, specialty chains and bakery-cafes.
As a planning rule of thumb, allow about 15-18 sq ft (1.4-1.7 m²) of dining area per seat for a coffee shop with mostly two-tops and some lounge seating. A 600 sq ft (56 m²) seating area therefore holds roughly 33-40 seats. Your legal maximum is set by the occupant load in your local building and fire code, which uses its own factors, so confirm the final count with your architect or fire official.
A standard cafe chair has a seat height of about 18 in (46 cm), paired with a table at 29-30 in (74-76 cm), leaving 10-12 in (25-30 cm) between the seat and the tabletop. Counter stools sit at 24-26 in (61-66 cm) for a 36 in (91 cm) counter, and bar stools at 29-31 in (74-79 cm) for a 42 in (107 cm) bar ledge.
Yes. Everything is made to order, so we can adjust table top sizes, chair seat heights for counter versions, seat upholstery (including your own material, COM/COL), wood stains and powder-coat colors. We confirm every change on a dimensioned shop drawing before production, and can build a pre-production sample on request.
Typically 30-45 days for standard designs and 45-60 days for custom work, counted from approval of drawings and samples, plus sea transit to your port. The exact schedule depends on quantities and finishes and is confirmed in each quote. For an opening date, work back from your fit-out schedule and allow a margin for customs and delivery.
Yes. We ship by sea in export packing and quote FOB (you arrange freight from China), CIF (we ship to your port) or DDP (delivered with duties paid) on request. We do not keep a local warehouse, so furniture is made for your order and shipped direct from Foshan.